|
Heat Exchangers
Built, wired and tested by Data Aire, these units are ruggedly designed, of aluminum housing with aluminum fins for maximum heat transfer. Up to 100 ton capacities are available, including low decibel versions in both condensers and fluid coolers. |
 | | Condensers OutdoorA wide range of outdoor condensers are available. Condensers are manufactured by Data Aire and sized to meet the heat rejection and ambient conditions as required. The industrial duty design includes a aluminum housing, aluminum finned copper tube coils, powder coated fan guards, energy efficient thermally protected direct drive motors with a variable fan speed control on the lead fan motor for proper control down to -20° F. Additional fan motors are controlled with ambient thermostats. |
 | | Condensers IndoorA wide range of floor mounted indoor condensers with horizontal intake and discharge are available for applications where an outdoor condenser cannot be used. Finished to match the indoor evaporator section, the condenser includes a centrifugal, forward curved, double width, double inlet blower engineered for quiet, reliable operation. The belt driven variable pitch drive provides adjustable air flow. The motor has internal overload protection and is mounted on an adjustable slide base. Indoor condensers are provided with a factory mounted and piped receiver, complete with a head pressure control valve to maintain head pressure under varying ambient conditions down to -30° F. |
 | | Condensing Unit OutdoorThese heat exchangers are identical to outdoor condensers with the addition of the compressor being outdoors rather than inside the evaporator. Condensing units are availabe in 3 to 100 ton capacities. Single compressor units range from 3 to 50 ton while dual compressor units range from 6 to 100 ton capacity. Like condensers, condensing units have aluminum housing, aluminum finned copper tube coils, powder coared fans guards, energy efficient thermally protected direct drive motors with a variable fan speed control on the lead fan motor for proper control down to -20 F. Additional fan motors are controlled with ambient thermostats. |
 | | Fluid Coolers Outdoor (Dry Coolers)Remote outdoor fluid coolers are available in a variety of sizes. Each dry cooler is manufactured with a aluminum housing for longer life and protection from outdoor elements, aluminum finned copper tube coil, powder coated fan guards, surge tank, motor contactor, pump contactor, and energy efficient thermally protected direct drive motors. Multiple fan motors are staged to maintain the desired condenser supply fluid temperature. |
| | Fluid Coolers Indoor (Dry Coolers)6, 7, 9, 11, 15, 17, 21, 24 and 28 ton A wide range of floor mounted indoor fluid coolers with horizontal intake and discharge are available for applications where an outdoor dry cooler cannot be used. Finished to match the indoor evaporator section, the dry cooler includes a centrifugal, forward curved, double width, double inlet blower engineered for quiet, reliable operation. The belt driven variable pitch drive provides adjustable air flow. The motor has internal overload protection and is mounted on an adjustable slide base. |
Data Aire reserves the right to make design changes for the purpose of product improvement,
or to withdraw any design without notice. |
|
