STANDARD REMOTE
OUTDOOR TYPE - MODEL DAFC
Unit Cabinets are constructed
of heavy duty gauge corrosion resistant galvanized steel with a powder coated
finish, thoroughly reinforced with riveted gussets.
Fan outlets provide additional strength to fan
panel and assure even air flow for quiet operation.
Mounting legs are constructed of heavy duty
galvanized steel and are shipped with the unit for field installation.
The condenser coil is constructed of plate type
die formed, aluminum fins mechanically bonded to copper tubes and employ full
height, self-spacing collars which completely cover the tube surface.Ê The coil is pressure and leak tested at 425
PSIG air under warm water, evacuated, dehydrated, and sealed with caps on
connections.
Propeller type fans, carefully matched to the
coil, cover a large percentage of the coil face area
providing a uniform air distribution.Ê
The direct drive fans have heavy duty gauge aluminum blades securely
riveted to zinc plated, chromate treated center hubs.Ê All fans are statically and dynamically
balanced before shipment and operate at low tip speeds for minimum vibration
and low sound levels.
The fan motors are heavy duty PSC or three phase
motors withÊ
permanently lubricated ball bearings.Ê All motors are thermally protected against
burn-out and may be started by a single contactor.Ê Protective slingers shield the motors from
weather damage.
All motors are factory wired with leads
terminating in a weather protected junction box located on the outside of the
unit casing.Ê Fan motors are _
horsepower, 1075 RPM.
The fan guards are constructed of heavy gauge,
close meshed steel wire powder coated for corrosion resistance.
All Data Aire DAFC type condensers are E.T.L.
listed.ÊÊ
Consult
factory for standard DAFC fluid cooler capacities - Capacities will vary with
GPM, entering and leaving water temperatures, and outdoor ambient.
LOW DECIBEL REMOTE
OUTDOOR TYPE - MODEL DAFC-LD
Unit Cabinets are constructed of heavy duty
gauge corrosion resistant galvanized steel with a powder coated finish,
thoroughly reinforced with riveted gussets.Ê
The interior panels are insulated for sound attenuation.
Fan outlets provide additional strength to fan
panel and assure even air flow for quiet operation.
Mounting legs are constructed of heavy duty
galvanized steel and are shipped with the unit for field installation.
The condenser coil is constructed of plate type
die formed, aluminum fins mechanically bonded to copper tubes and employ full
height, self-spacing collars which completely cover the tube surface.Ê The coil is pressure and leak tested at 425
PSIG air under warm water, evacuated, dehydrated, and sealed with caps on
connections.
Propeller type fans, carefully matched to the
coil, cover a large percentage of the coil face area providing a uniform air
distribution.Ê The direct drive fans have
heavy duty gauge aluminum blades securely riveted to zinc plated, chromate
treated center hubs.Ê All fans are
statically and dynamically balanced before shipment and operate at low tip
speeds for minimum vibration and low sound levels.
The fan motors are heavy duty PSC or three phase
motors withÊ
permanently lubricated ball bearings.Ê All motors are thermally protected against
burn-out and may be started by a single contactor.Ê Protective slingers shield the motors from
weather damage.
All motors are factory wired with leads
terminating in a weather protected junction box located on the outside of the
unit casing.Ê Fan motors are1/2
horsepower, 850 RPM.
The fan guards are constructed of heavy gauge,
close meshed steel wire powder coated for corrosion resistance.
All Data Aire DAFC-LD type condensers are E.T.L.
listed.
Consult
factory for Low Decibel DAFC-LD fluid cooler capacities - Capacities will vary
with GPM, entering and leaving water temperatures, and outdoor ambient.
INDOOR FLUID COOLERS - MODEL DAFC-PB
Cabinets are constructed from 14 gage welded tubular steel and are
coated with a heavy corrosion inhibiting finish for long life.Ê The unit has complete front and side access
by means of high quality furniture grade steel panels with heavy duty
hinges.Ê The panels are lined with 1 inch
thick, 1.5 pound density insulation.Ê
Each door is provided with sure close latches.Ê Cabinets are painted to match or contrast
with other equipment in the space.Ê
The blower is a belt driven centrifugal type,
double width, double inlet and is statically and dynamically balanced as a
complete assembly to a maximum vibration level of two mills in any plane.Ê The blower wheel is supported on a heavy
steel shaft with self-aligning ball bearings with minimum life span of 100,000
hours.Ê The blower is driven by a motor
mounted on an adjustable slide base.Ê The
drive motor is 1750 RPM.Ê The drive
package is belt driven with dual belts and a variable pitch sheave sized for
200% of the fan motor horsepower. A factory mounted and wired disconnect is
optional.
The coil is constructed with copper tubes and
aluminum fins.Ê The coil sits in
stainless steel drain pan.Ê All piping
terminates inside the unit cabinet.Ê
Standard piping is through the bottom of the unit.Ê Options are available for either top piping
or side piping with short right hand side door.
Circulating pump(s) may be ordered factory
installed as an option.
Air intake is horizontal.Ê Standard discharge is horizontal with top air
discharge available as an option.ÊÊ An
optional integral filter rack with 4" thick, 30% efficient filters (based
on ASHRAE Std. 52-76) is available for the air intake.
All Data Aire DAFC-PB type condensers are E.T.L.
listed.
Consult
factory for fluid cooler capacities - Capacities will vary with GPM, entering
and leaving water temperatures, and outdoor ambient.
